Oil Filter Sandwich Plate

CNC Machined Aluminum Oil Filter Sandwich Plate

Important these will fit most applications that have a spin-on oil filter, if you have a cartridge this will not work. This plate will fit if your filter has M20x1.5 or 3/4-16 Threads, if your not sure simply go on pureoil.com and choose your make and model and it will tell you if its a M20x1.5 or 3/4-16.

Other Important Note

At this time we have Anodized Red and Anodized Gold finished plates, you will receive a Red one or a Golden colored one depending on our inventory you may receive either or, we don't have any other colors at this time. The pictures below show a Blue one you will not receive a Blue one.

Brand new oil filter sandwich plate. This is by far the easiest and cleanest way to install, oil sensors for oil temperature gauge, oil pressure gauge, turbo oil feed line (not the drain line) or any source of oil needed for example vtec conversions.

Made of one piece CNC aluminum not a cast , CNC is more precise and more solid cannot compare the quality obtained via CNC vs Cast piece .

Has a diamater of 3 1/8 inch, which means that the oil filter gasket (seal) on the oil filter must not exceed 3 1/8 inch in diamater. On most imports 4 cyl, V6 , inline 6 there is no problem, the only time the filter seal can be larger is on big V8 engines or big pickup trucks.

There is a an oil seal behind the plate that seals against the block.

Diamaters. 3 1/8 inch diamater by 1 1/8 inch thick .

This sandwich plate has 3 oil ports, 2 are plugged in the front and one is open, which means that if you plan to buy it and install it one port must be used since that only 2 oil ports are capped. The oil ports are threaded 1/8" NPT most sensors and lines will be 1/8" NPT.

Installation Instructions available in our "Tech Center" Page.

PRICE $39.99

Shipping Prices

USA $8.95 UPS Ground
Canada $11.95 Canada Post Expedited
International $16.95 USPS First Class Mail





			CNC Machined Aluminum Oil Filter Sandwich Plate Important these will fit most applications that have a spin-on oil filter, if you have a cartridge this will not work. This plate will fit if your filter has M20x1.5 or 3/4-16 Threads, if your not sure simply go on pureoil.com and choose your make and model and it will tell you if its a M20x1.5 or 3/4-16. Other Important Note At this time we have Anodized Red and Anodized Gold finished plates, you will receive a Red one or a Golden colored one depending on our inventory you may receive either or, we don't have any other colors at this time. The pictures below show a Blue one you will not receive a Blue one. Brand new oil filter sandwich plate. This is by far the easiest and cleanest way to install, oil sensors for oil temperature gauge, oil pressure gauge, turbo oil feed line (not the drain line) or any source of oil needed for example vtec conversions. Made of one piece CNC aluminum not a cast , CNC is more precise and more solid cannot compare the quality obtained via CNC vs Cast piece . Has a diamater of 3 1/8 inch, which means that the oil filter gasket (seal) on the oil filter must not exceed 3 1/8 inch in diamater. On most imports 4 cyl, V6 , inline 6 there is no problem, the only time the filter seal can be larger is on big V8 engines or big pickup trucks. There is a an oil seal behind the plate that seals against the block. Diamaters. 3 1/8 inch diamater by 1 1/8 inch thick . This sandwich plate has 3 oil ports, 2 are plugged in the front and one is open, which means that if you plan to buy it and install it one port must be used since that only 2 oil ports are capped. The oil ports are threaded 1/8" NPT most sensors and lines will be 1/8" NPT. Installation Instructions available in our "Tech Center" Page. PRICE $39.99 Shipping Prices USA $8.95 UPS Ground Canada $11.95 Canada Post Expedited International $16.95 USPS First Class Mail

			3 x Oil Ports 2 x Fittings Included (You will need to use one)