Audi R8 V8 4.2L Performance Air Filters Custom K&N Filters
SKU:
$349.95
$349.95
per item
IMPORTANT WARNING WHEN SELECTING USPS AS YOUR SHIPPING CHOICE PLEASE CLICK HERE
FITMENT:
2008 to 2013 All Models
2014-2015 With Manual Transmission Only.
WARRANTY: Lifetime limited warranty (Please read more about our warranty here)
RETURN POLICY: Please see our return policy here
WHAT'S INCLUDED: NHP Exhaust Headers (Bolts on muffler flange only *see more in description)
Product Description
Maxspeed-Motorsports as developed this high performance air filter kit for the Audi R8 V8 4.2L , these filters fit perfectly with zero issues, the factory cover will go back on with ease. We use Genuine K&N Air Filters and K&N Air Filter Wraps (Sock) and we have designed Aluminum CNC machined Adapters for filter attachment and MAF Sensor OEM Adapter, our CNC adapters fit perfectly in the specific grooves on the air filter box.
This air filter kit is less restrictive than the factory air filters, the paper air filters from the factory do an excellent job for filtering however they do restrict the airflow, the K&N Air Filters allow more air to enter the intake manifold allowing for better engine response and better sound from that V8. We also use the K&N Wraps to stop small dirt particles with restricting the airflow
Owning an R8 myself i can confirm the better sound and more punch above the 4500 RPM range.
Check out our extended description and picture gallery for over sized pictures by scrolling the page down.
FITMENT:
2008 to 2013 All Models
2014-2015 With Manual Transmission Only.
WARRANTY: Lifetime limited warranty (Please read more about our warranty here)
RETURN POLICY: Please see our return policy here
WHAT'S INCLUDED: NHP Exhaust Headers (Bolts on muffler flange only *see more in description)
Product Description
Maxspeed-Motorsports as developed this high performance air filter kit for the Audi R8 V8 4.2L , these filters fit perfectly with zero issues, the factory cover will go back on with ease. We use Genuine K&N Air Filters and K&N Air Filter Wraps (Sock) and we have designed Aluminum CNC machined Adapters for filter attachment and MAF Sensor OEM Adapter, our CNC adapters fit perfectly in the specific grooves on the air filter box.
This air filter kit is less restrictive than the factory air filters, the paper air filters from the factory do an excellent job for filtering however they do restrict the airflow, the K&N Air Filters allow more air to enter the intake manifold allowing for better engine response and better sound from that V8. We also use the K&N Wraps to stop small dirt particles with restricting the airflow
Owning an R8 myself i can confirm the better sound and more punch above the 4500 RPM range.
Check out our extended description and picture gallery for over sized pictures by scrolling the page down.
3 available
When designing this air filter kit, we selected the filters that would take up as much space as possible in that airbox to achieve proper filtration for that V8 Engine, in addition using the filter wraps for added protection against small dust particles, our CNC Machined adapters are made of the finest aluminum and fit perfectly. We know K&N does have a kit available but our kits have an edge with better filtration and solid attachments for the air filter and MAF sensor.
Installation is a breeze these will come pre-assembled for your convenience, for installation remove small middle engine cover, remove the top airbox cover, disconnect both MAF Sensor electrical connectors, loosen both clamps on the rubber boots and voila the filters are off all you have to do is remove the MAF Adapter by removing 2 x T20 torx screw and assemble the MAF Adapters on our CNC Machined adapter with the provided hardware and re-assemble everything.
Installation is a breeze these will come pre-assembled for your convenience, for installation remove small middle engine cover, remove the top airbox cover, disconnect both MAF Sensor electrical connectors, loosen both clamps on the rubber boots and voila the filters are off all you have to do is remove the MAF Adapter by removing 2 x T20 torx screw and assemble the MAF Adapters on our CNC Machined adapter with the provided hardware and re-assemble everything.
